BETASEAL and the correct time following a windshield installation

Betaseal 1

In response to requests from our customer Dow Automotive Systems is able to release the following information related to it’s BETASEAL adhesive systems and the correct time following a windshield installation that a calibration on a motor vehicle equipped with an advanced driver assistance system (ADAS) can be completed.
A replaced windshield sits firm in the aperture when a 1 component PU-adhesive has cured (in depth) for 1 mm from both sides. 1 mm cure is achieved after approx. 1 hour which results in approx. 0.5 MPa shear force.
This information should be considered for the listed BETASEAL repair adhesives which permit an ADAS-calibration after following times



BETASEAL ™ 1527EP

BETASEAL-1527EP

  • 60-minute minimum drive away in temperatures from -10°C to 40°C
  • High-modulus formula helps maintain structural integrity at original equipment levels
  • Nonconductive urethane reduces interference with radio, mobile phone, GPS or additional driver aid technologies
  • No heating required for improved work efficiency
  • Improved formula is easy to use with excellent decking and short cut-off string
  • Choice of three sizes – 310 ml cartridge or 400 ml or 600 ml sausage packs

 


betaseal-1580BETASEAL ™ 1580

  • Excellent link-up strength allows for 30-minute minimum drive-away.
  • Can be applied directly to freshly trimmed, cut-back PU bead with no need for primer or activator – for increased productivity
  • High-modulus formula helps maintain structural integrity .
  • Simple, three-step glass replacement solution – clean, prime, bond
  • Non-conductive formula – reduces interference with radio, mobile phone, GPS or additional driver aid technologies
  • No heating required for improved work efficiency

Betaseal

Twitter
LinkedIn

IMPROVEMENTS IN YOUR PRODUCTION PROCESSES

We look forward to optimize your applications through our technologies and advise you without any commitment.

Product Search

TDS / MSDS

To request any type of technical sheet or safety sheet.