Merbenit E20 is as powerful as conventional elastic adhesive and sealing material, with only half its weight: Save more than one kilogram per sealed square metre.
With a density of 0.7 g/cm³ Merbenit E20 is much lighter than other products. This permanent elastic adhesive and sealant based on SMP is suitable for many industry and automotive applications. Other special features are the noise insulating and vibration damping properties.
Product advantages of Merbenit E20
Table of Contents
- Very low density
- Low thermal conductivity
- Noise insulating and vibration damping
- Simple processing
- Tolerance compensating
- Permanently elastic and stress compensating
- Free of solvents, isocyanates and silicones
Technical data Merbenit E20
Shore-A-hardness, DIN 53505 = 36
Modulus elongation at 100%,DIN 53504 S2 = ca. 1.4 N/mm²
Elongation at break, DIN 53504 S2 = ca. 120 %
Tensile strength, DIN 53504 S2 = ca. 1.5 N/mm²
Consistency = stable
Tooling time = max. 35 min.
Curing rate after 24h ≥ 3.5 mm
Curing rate after 48h ≥ 6.0 mm
Density = 0.70 ± 0.05 g/cm³
Volume change, DIN EN ISO 10563 ≤ 2%
Temperature resistance after curing = – 40 °C to + 80 °C
Application temperature = + 5 °C to + 40 °C
All measurements were performed under normal conditions (23 °C and 50 % relative humidity).
Merbenit E20 TDS (.pdf)
Application of Merbenit E20
Absorbation of vibrating elements, isolation of voids and noise, heat and cold insulation in vehicle constructions. Car body sealings and weakly stressed or large area bonding in the car interior.
Substrate range of Merbenit E20
Suitable materials are metals, powder-coated, varnished, galvanised, anodised, chromed or hot zinc dipped surfaces, various plastics, ceramics, stone, concrete and wood. Due to the large variety of different plastics and compositions as well as materials which are susceptible cracks, preliminary tests are recommended.
Available in www.antala.co.uk