Permabond F202 Anaerobic Retainer

Permabond F202 can resist the thermal stresses that may be generated when bonding dissimilar surfaces. Its ‘non-drip’ consistency makes it suitable for use on larger fittings or where wide tolerances are expected.

Features & Benefits

• Toughened
• Thixotropic
• Ideal when bonding dissimilar materials
• Good adhesion to copper and aluminium
• Improved fatigue life
• WRAS listed for contact with wholesome (potable) water

Applications

• Primarily designed for use on metal surfaces

Surface Preparation

• Surfaces should be clean, dry and grease-free before applying the adhesive. Use a suitable solvent (such as acetone or isopropanol) for the degreasing of surfaces.
• Some metals such as aluminium, copper and its alloys will benefit from light abrasion with emery cloth (or similar), to remove the oxide layer.

Directions of Use

1. Apply a circumferential bead, preferentially to the female component.
2. Assemble with a twisting action for larger components use thixotropic products to prevent run off.
3. Take care to ensure adhesive does not enter ball races or other mechanisms