• Cromwell Road, Bredbury Park Industrial Estate Bredbury - Stockport SK6 2RF
  • Mon - Fri 8.00am - 5.00pm

Permabond 910 low viscosity cyanoacrylate adhesive

Permabond 910 is a single part methyl cyanoacrylate adhesive that provides excellent adhesion to metal surfaces.

Permabond 910 low viscosity cyanoacrylate adhesive

Permabond 910 is a colourless, low viscosity adhesive with a fast cure time of 10 seconds. 

Permabond 910 was designed for bonding steel, aluminium, brass and other metal surfaces. It can also be used to bond plastics and rubbers.


  • Adhesion to a wide variety of substrates and surfaces
  • Ideal for bonding metals, plastics and rubbers


  • Excellent adhesion to metal surfaces
  • Easy to apply and dispense
  • Fast cure
  • No mixing required

For pack sizes, please see Additional Information. 

Permabond C-792 Regulations / Approvals:

  • Approved to MIL – A – 46050C Type I Class 2 (existing designs) & CID
  • A-A-3097 Type II Class 2 (new designs)

Surface Preparation

  • Surfaces should be clean, dry and free from grease before adhesive application. Use a solvent, ideally acetone or isopropanol to degrease surfaces.
  • Metals such as aluminium, copper and its alloys will benefit from light abrasion with emery cloth (or similar), to remove the oxide layer.

How to use Permabond 910 Cyanoacrylate adhesive

This product is part of the Permabond range


To request any type of technical sheet or safety sheet.