Search
Close this search box.
permabond 947

Permabond 947 Instant Adhesive with Maximum Gap Filling

Permabond 947 is a multi-purpose cyanoacrylate adhesive with gap filling.

Permabond 947 Instant Adhesive with Maximum Gap Filling

This adhesive does not require mixing or heating, making it easy to use.

This adhesive eliminates unsightly fogging next to bond lines, which is commonly seen with other cyanoacrylate adhesives on a hot and humid day.

Permabond 947 can be used to bond a wide range of substrates.

Applications

  • Multi-purpose structural adhesive for bonding different materials and surfaces

Features

  • Low odour for improved worker comfort
  • Non-frosting –good aesthetic appearance
  • Ease of use –no mixing or heat cure
  • Bonds most materials
  • 100% reactive, no solvents

For pack sizes, please see Additional Information. 

Hot Strength

Permabond 947 can withstand higher temperatures for brief periods (such as for paint baking and wave soldering processes) providing the joint is not unduly stressed. The minimum temperature the cured adhesive can be exposed to is -55°C (-65°F) depending on the materials being bonded.

Surface Preparation

  • Surfaces should be clean, dry and grease-free before applying the adhesive. Use a suitable solvent (such as acetone or isopropanol) for the degreasing of surfaces.
  • Some metals such as aluminium, copper and its alloys will benefit from light abrasion with emery cloth (or similar), to remove the oxide layer.

Directions for Use

  1. Apply the adhesive sparingly to one surface.
  2. Bring the components together quickly and correctly aligned.
  3. Apply sufficient pressure to ensure the adhesive spreads into a thin film.
  4. Do not disturb or re-align until sufficient strength is achieved, normally in a few seconds.
  5. Any surplus adhesive can be removed with Permabond CA solvent, nitromethane or acetone.

NB: For difficult or porous surfaces using a Permabond activator is recommended. If bonding polypropylene, polyethylene, PTFE or silicone, prime first with Permabond Polyolefin Primer (POP).

How to use Cyanoacrylate adhesives

This product is part of the Permabond range

Want More Information?

Contact a technical specialist for support, information and quotes.

TDS / MSDS

To request any type of technical sheet or safety sheet.

Get in touch with Antala

The personal data voluntarily provided by you, through this web form will be treated by ANTALA LTD. as responsible for the treatment, in order to meet your request, query, complaint or suggestion, without communications or data transfers occurring and kept for the time necessary to meet your request. You can exercise the rights of access, rectification or deletion of your data, by writing to arco@antala.uk, for more information, you can consult our Privacy Policy

Request a Quote

Please send us your request to receive a customised offer, either for specific products or special requirements.

TECHNICAL DATA SHEET AND SAFETY DATA SHEET

Please fill in the form to receive the .pdf document.