Close this search box.

DOWSIL™ 7092 High Green Strength Adhesive/Sealant

DowSil 7092 is a one-component silicone adhesive and sealant that cures immediately after application.

DOWSIL™ 7092 High Green Strength Adhesive/Sealant

DowSil 7092 High Green Strength Adhesive and Sealant provides resistance immediately after application, thereby improving productivity. Its main characteristic is to provide a high initial resistance that allows the movement of the blank, while silicone cures. Designed for applications that require immediate handling and processing of the units.

DowSil 7092 Features

Adheres without primer for the most common materials including certain steels, aluminium and glass, as well as some plastics used in engineering applications.

  • Provides instant green force
  • Easy-to-use one-component adhesive/sealant
  • Cures at room temperature when exposed to moisture in the air
  • Excellent adhesion to a wide range of substrates such as glass, metals and plastics
  • Does not fall, the consistency of the paste
  • Cures a strong and flexible rubber
  • Stable and flexible from -50 ° C to + 150 ° C
  • Fast resistance increases productivity improvements thanks to quick handling of linked units
  • Saves time, since no buffer is needed to increase resistance “

DowSil 7092 Applications

  • Automotive
  • Solar
  • Lighting
  • General Industry

Regulations / Approvals:

  • UL 94 HB (0.73mm).

Working methods

  • Manual or with automatic mixing and dosing equipment.


  • All surfaces must be clean and dry.
  • Degrease and remove all contaminants that may reduce adhesion with a suitable solvent such as isopropyl alcohol, acetone or methylethylacetone and heptane.
  • Good adhesion without primer can be obtained on a wide variety of surfaces, including steel, aluminium, glass and certain plastics.
  • PTFE, polyethene, polypropylene and other related materials are some of the surfaces where good adhesion is not normally achieved

DowSil 7092 High Green Strength Application

  • Apply a coat of DowSil 7092 High Green Strength Adhesive and Sealant to one of the prepared surfaces and quickly coat it with the other surface to adhere.
  • Upon exposure to moisture, the newly applied product will develop a “skin” in about 15 – 25 minutes at room temperature and 50% relative humidity.
  • Any manipulation with tools should be carried out before the formation of this skin. The surface can be easily worked with a spatula.
  • A high level of humidity and higher temperatures will speed up the curing process and skin formation.

Want More Information?

Contact a technical specialist for support, information and quotes.


To request any type of technical sheet or safety sheet.

Get in touch with Antala

The personal data voluntarily provided by you, through this web form will be treated by ANTALA LTD. as responsible for the treatment, in order to meet your request, query, complaint or suggestion, without communications or data transfers occurring and kept for the time necessary to meet your request. You can exercise the rights of access, rectification or deletion of your data, by writing to, for more information, you can consult our Privacy Policy

Request a Quote

Please send us your request to receive a customised offer, either for specific products or special requirements.


Please fill in the form to receive the .pdf document.