Permabond UV630

Permabond UV630 - UV Curable Adhesive for Bonding Plastics

Permabond UV630 is a single part, fast setting, and UV curable adhesive designed specifically for bonding plastics.

Permabond UV630 - UV Curable Adhesive for Bonding Plastics

Permabond UV630 is a single component adhesive that has excellent adhesion to a variety of plastics including polycarbonate.

Permabond UV630 has very high shear strength, elongation and impact resistance making it ideal for applications that require substrates with different coefficients of thermal expansion


  • Bonding a wide range of plastics including polycarbonate
  • Applications that require substrates with different coefficients of thermal expansion


  • Cure on demand
  • High shear strength
  • Fast curing with low – power lamps
  • 100% solids, no solvents
  • Excellent adhesion to plastics

For pack sizes, please see Additional Information. 


  • ISO 10993 – 5 Cytotoxicity

Hot Strength

Permabond UV630 can withstand higher temperatures for brief periods (such as for paint baking and wave soldering processes) providing the joint is not unduly stressed. The minimum temperature the cured adhesive can be exposed to is -55°C (-65°F) depending on the materials being bonded.

Surface Preparation

  • Surfaces should be clean, dry and grease-free before applying the adhesive. Use a suitable solvent (such as acetone or isopropanol) for the degreasing of surfaces.
  • Some metals such as aluminium, copper and its alloys will benefit from light abrasion with emery cloth (or similar), to remove the oxide layer.

[su_youtube url=”″ width=”800″ height=”500″]

Directions for Use

  1. Adhesive can either be applied directly from the bottle or dispensed via automated dispensing equipment for more accurate dosing. Minimise exposure of product to ambient light.
  2. It is important to try to prevent air entrapment within the joint as this could be detrimental to the finished appearance of the adhesive.
  3. Parts should be firmly held and not disturbed during cure. Expose the joint to ultra-violet light for the appropriate time to ensure full cure. Cure time depends on the power of the UV lamp, its spectral output, the distance between the lamp and the components, and the transmission characteristics of the substrates.
  4. For help selecting a suitable lamp and/or dispensing equipment, please contact Antala technical helpline.

Plastic bonding UV instructions

[su_youtube url=”” width=”800″ height=”500″]

This product is part of the Permabond range

Please be advised

As COVID-19 continues to impact many industries, companies and their day-to-day processes, we would like to assure you that Antala Ltd is classified as an “Essential Business” and is open for business as usual. 

We have implemented our continuity plan to maximise the safety of our employees while still providing critical support, sales, and fulfilment services to our domestic and international customers. 

Please contact us via phone, website or email 

We wish you the best during this difficult period.