Search
Close this search box.

Permabond ET5145 – FDA Approved Adhesive

Permabond ET5145 – FDA Approved Adhesive

Product Description Permabond ET5145

Permabond ET5145 is a 1:1 two-part epoxy adhesive. It has excellent resistance to shock and vibration and is ideal for structural bonding of metal, wood, composite materials and certain plastics. ET5145 is highly shear resistant and has excellent environmental durability. It is suitable for applications where the cured product comes into contact with food or drink since it is formulated with FDA-approved raw materials.

One of the applications of the adhesive is the manufacture of filters for the food industry.

Features & Benefits

Here are the characteristics of the product:

  • Adhesion to a wide variety of substrates
  • Full cure at room temperature
  • FDA compliant formulation
  • High resistance to cutting and peeling
  • Good impact resistance

Instructions for use Permabond ET5145

The instructions are as follows:

1. Cartridges:

  • Insert the cartridge into the dispenser gun and guide the plunger into the cartridge.
  • Remove the cartridge cap and dispense the material until both sides are flowing.
  • Place the static mixer on the cartridge’s end and dispense the material.

2. Apply the material to one of the substrates.
3. Join the parts. Parts should be bonded within 50 – 80 minutes of mixing the two epoxy components.
4. Large amounts and/or higher temperatures will decrease pot life.
5. Apply pressure to the assembly by holding for 5 hours or until force handling is obtained.
6. Full cure is obtained after a minimum of 24 hours at 25°C (77°F). Heat can be used to speed up the curing process.

Regulations

Permabond ET5145 has been specifically formulated for use in applications that require compliance with FDA regulations:

  • FDA 175.105 and 175.300
Category Brands: .

Want More Information?

Contact a technical specialist for support, information and quotes.

TDS / MSDS

To request any type of technical sheet or safety sheet.

Get in touch with Antala

The personal data voluntarily provided by you, through this web form will be treated by ANTALA LTD. as responsible for the treatment, in order to meet your request, query, complaint or suggestion, without communications or data transfers occurring and kept for the time necessary to meet your request. You can exercise the rights of access, rectification or deletion of your data, by writing to arco@antala.uk, for more information, you can consult our Privacy Policy

Request a Quote

Please send us your request to receive a customised offer, either for specific products or special requirements.

TECHNICAL DATA SHEET AND SAFETY DATA SHEET

Please fill in the form to receive the .pdf document.