Tectyl 511 M – Premium Solvent-Based Anti-Corrosive Compound

Tectyl 511 M is an oil-based, solvent-cut and water displacement anticorrosive compound. Meets the performance requirements of military specification MIL-C-16173 D, Grade 5.

Tectyl 511 M – Premium Solvent-Based Anti-Corrosive Compound

  • Tectyl 511-M is an oil-based, water-repellent soluble corrosion prevention compound that meets the performance requirements of Military Specifications MILC-16173D, Grade 5.
  • Tectyl 511-M has been developed for the protection of ferrous and non-ferrous industrial components during their transportation under cover and indoor storage.
  • Dries to a clear, amber, oily film.


  • Superior Protection : With the recommended dry film thickness, Tectyl 511 M protects against corrosion during product storage and transport.
  • Treatment: It is easy to apply and easy to remove when it is no longer needed.
  • Economical: With a dry film thickness of only 7.5 microns, you can protect a large area with only a small amount of product.

Surface Preparation

  • The maximum performance of Tectyl 511 M can be achieved only when the metal surfaces to be protected are clean, dry and free of rust, oil and grinding flakes and a substrate temperature of 10-35 ° C at the time of product application. .


  • This product is formulated for use as supplied.
  • Never dilute the product.
  • Tectyl 511 M can be applied by low pressure air spray or by immersion


  • It can be removed with mineral spirits or any similar petroleum solvent, hot alkaline wash or low pressure steam.
  • If dried and cured, the film can also be removed with Tectyl Biocleaner.


  • It should be stored at temperatures between 10-35 º C.
  • It should be shaken slightly before use.
  • Due to its composition, during storage it may be subject to changes in viscosity after production.

Want More Information?

Contact a technical specialist for support, information and quotes.


To request any type of technical sheet or safety sheet.

Request a Quote

Please send us your request to receive a customised offer, either for specific products or special requirements.


Please fill in the form to receive the .pdf document. 

Filling of gaps and trailing edges
Bonding of sensors and current conductors
Repair, fixing of inserts and added elementsof inserts and added elements
Casing repair and bonding
Tooling with high temperature resistance
Union of added elements: Vortex, Serrations, etc.
Bonding of Nacelle
Control Shaft & Components
Protection of Screws & Components for Export
Sealing of Assembled Parts