Permabond Initiator 43

Permabond Initiator 43 is an easy to use, no mix resin and initiator system.

Permabond Initiator 43

Permabond Initiator 43 is solvent free initiator for acrylic adhesives. Suitable for use on difficult to bond plastics.

The initiator is versatile in its application, where it can be sprayed, brushed or wiped onto the part to create a thin even coating. The formulation allows a long open time or alternatively parts can be bonded immediately.

Applications

Suitable for use with Permabond structural acrylic (TA) adhesives
For pack sizes, please see Additional Information.

Features

Quick and easy to use
Brush on liquid
Use with Permabond Structural (TA) adhesives

Surface Preparation

Surfaces should be clean, dry and grease-free before applying Initiator 41
Brush, wipe or spray Permabond Initiator 43 onto part
Apply the Permabond TA structural acrylic to the part
Parts should be clamped firmly and left for the duration of the handling time
Allow the adhesive to cure for 24 hours at 23°C.
To remove any excess initiator, suitable alcohol such as isopropanol, acetone or MEK can be used.
You can read more about Surface Preparation here

This product is part of the Permabond range

SKU 43 Category Uncategorised Brands: Permabond.

TDS / MSDS

To request any type of technical sheet or safety sheet.

Automotive

Wind Industry

Railway Industry

Aerospace Industry

Marine Industry

Commercial Transportation

General Industry

Antala Ltd.

Antala Iberia

DGE Group

Permabond Initiator 43