The Top Wind Turbine Repair Solutions

Table of Contents

Whilst in operation, wind turbines are prone to damage from external forces. The rotor blades on a wind turbine require regular inspection and maintenance to keep them in good condition; making the perfect wind turbine repair solution essential.

Most rotor blades are constructed from glass fibre however a growing number of blades are using a hybrid of glass and carbon fibre to improve strength and stiffness while reducing weight.

Wind Turbine Blade Repair

The wind turbine blades or rotor blades can be subjected to bird strikes, lightning strikes where the carbon fibre in the blade structure can act as an electrical conductor, and leading edge corrosion caused by rain, hail, sand, insects and ice.

These factors can cause damage to the rotor blades and reduce the aerodynamic performance, resulting in decreased power production. Studies have shown leading edge corrosion can result in a drag increase of up to 500%, culminating in a decrease in annual energy output of 20%. This is why having the right wind turbine blade repair solution is essential for efficient and effective running


Challenges facing wind turbine blade repairs

Regular inspections can expose any faults or damage to the rotor blades before the turbine fails. This effectively minimises downtime caused by unanticipated repairs, as the wind turbine blade repairs can be optimised.

Technicians can inspect, clean and repair the rotor blades to ensure they are in good condition. When repairing the rotor blade, the technician is suspended from the rotor hub and works on the subject blade, which is stopped in the down position. Anchor lines may be deployed to the tower or around the blade.

A project overseer on the ground is responsible for resin preparation, control of cure parameters, and for keeping records for quality control purposes.

One of the most challenging aspects of repairing the rotor blades is curing the resin, where in some cases, it can take 24 hours for the resin to cure. This results in downtime and a loss of revenue.


Solutions for wind turbine blade repair

Araldite methacrylate structural adhesives can speed up the repair process for technicians. These adhesives have high strength and rapid curing with the ability to bond and repair different substrates such as composites, metals and thermoplastics. Methacrylates exhibit high lap shear strength comparable to epoxies and have good tensile strength.

Our recommended solutions are: Araldite 2050, Araldite 2051, Araldite 2021-1, Araldite 2022-1 and Araldite 2048-1. All products are available in 50ml and 380ml cartridges making them portable and convenient for field work. They provide accurate mixing and dispensing saving time and providing ease of repeatability. These adhesives can be used to repair leading edge erosion, small holes and surface defects.

Araldite 2050

A two component, ultra-fast curing methacrylate adhesive for speeding up bonding operations in extreme, cold temperatures.

Araldite 2051

A two component, rapid curing methacrylate adhesive designed for bonding applications in warm and humid conditions.

Araldite 2021-1

A two component, toughened, rapid curing methacrylate adhesive with minimal pre-treatment. Ideal for rapid fixing and filling of small voids.


Araldite 2022-1

A two component, fast cure methacrylate adhesive offering non-sag and gap filling up to 4mm.


Araldite 2048-1

A two component, fast setting, flexible, methacrylate adhesive system that allows rapid attachment of parts.

For more information on adhesives for the wind power industry, please get in touch.

We are your technical partner.

If you have any questions or want to find out more about the possibilities for your industrial application, please complete the contact form and one of our experts will be in touch.

If you have a problem with industrial adhesives, sealants, or electronic protection products and require advice, you can contact our technical support service. Our team can help you to optimize your processes and applications.

Liked this article?

If you found this article interesting please share it using the buttons below.

Share on linkedin
LinkedIn
Share on twitter
Twitter
Share on email
Email
Share on whatsapp
WhatsApp
Share on print
Print
Making repairs in extreme conditions

New Huntsman Araldite whitepaper

latest posts
ARE YOU LOOKING FOR A SOLUTION?

We are committed to optimizing your applications through our technologies and we advise you without any commitment.

Subscribe to the Knowledge Hub

Sign up to receive more articles like this directly in your mail.

Please be advised

As COVID-19 continues to impact many industries, companies and their day-to-day processes, we would like to assure you that Antala Ltd is classified as an “Essential Business” and is open for business as usual. 

We have implemented our continuity plan to maximise the safety of our employees while still providing critical support, sales, and fulfilment services to our domestic and international customers. 

Please contact us via phone, website or email 

We wish you the best during this difficult period. 

MAKING REPAIRS IN DEMANDING CONDITIONS

This white paper examines how you can maximize staff time and minimize the number of hours when your critical items are out of action.